Dc01 Dc02 Dc03 Prime Cold Rolled Mild Steel Sheet Coils /Mild Carbon Steel Plate/Iron Cold Rolled Steel Plate Sheet Pric
| Thickness | 0.2-4mm |
| Width | 600-2500mm |
| Length | As customer's request |
| Technique | Cold rolled |
| Surface treatment | Bare/Shot Blasted and Spray Paint or as required. |
| Standard | ASTM,EN,GB,JIS,DIN |
| Material | Q195, Q215A/B, Q235A/B/C/D, Q275A/B/C/D, DC01 DC02 DD11 SPCC SGCC |
| Usage | Used in home appliances construction,machinery,manufacturing, container manufacturing, shipbuilding, bridges, etc. |
| Package | Standard export sea-worthy packing |
| Terms of Payment | T/T30% |
| Delivery Detail | Within 3-15 days after receipt of deposited or L/C at sight |
Product Introduction
Cold rolled steel is produced by cold rolling. Cold rolling is a steel plate that further thins the No.1 steel plate to a target thickness at room temperature. Compared with hot-rolled steel sheet, cold-rolled steel sheet is more precise in thickness, smooth and beautiful in surface, and has a variety of superior mechanical properties, especially in processing performance.It is mainly used in construction, light industry, automobile, agriculture, animal husbandry, fishery and commerce. Among them, the construction industry is mainly used to manufacture anti-corrosion industrial and civil building roof panels, roof grilles, etc.The light industry uses them to make household appliances shell, civil chimneys, kitchen appliances, etc. The automotive industry is mainly used to manufacture corrosion-resistant parts of cars, etc. Agriculture, animal husbandry and fisheries are mainly used for food storage and transportation, meat and aquatic products freezing processing equipment, and commerce is mainly used as material storage. Transportation, packaging, etc.
| Grade | C | Mn | P | S | Alta |
| DC01, SPCC | ≤0.12 | ≤0.60 | ≤0.045 | ≤0.045 | ≥0.020 |
| DC02, SPCD | ≤0.10 | ≤0.45 | ≤0.035 | ≤0.035 | ≥0.020 |
| DC03, SPCE | ≤0.08 | ≤0.40 | ≤0.030 | ≤0.030 | ≥0.020 |
| DC04, SPCF | ≤0.06 | ≤0.35 | ≤0.025 | ≤0.025 | ≥0.015 |
| Grade | RCL(Mpa) | RM(MPa) | A80mm(%) | R90 | N90 |
| DC01 | 140~280 | 270~410 | ≥28 | | |
| DC02 | 140~240 | 270~370 | ≥34 | ≥1.4 | |
| DC03 | 120~210 | 270~350 | ≥38 | ≥1.8 | ≥0.18 |
| DC04 | 120~180 | 270~330 | ≥40 | ≥2.0 | ≥0.20 |
| SPCC | 130~300 | 270~410 | | | |
| SPCD | 120~240 | 270~370 | | ≥1.3 | |
| SPCE | 120~210 | 270~350 | | ≥1.8 | ≥0.18 |
Product Advantages
1.The cold-rolled coil products are accurate in size, uniform in thickness, and the thickness difference of the coils generally does not exceed 0.01-0.03 mm or less, which can meet the requirements of high-precision tolerances.
2.It is possible to obtain extremely thin strips that cannot be produced by hot rolling (up to 0.001 mm or less).
3.The surface quality of cold-rolled products is superior, there are no defects such as pitting, hot-pressed iron oxide, etc.,which are often found in hot-rolled coils, and coils of different surface roughness (glossy or hemp) can be produced according to user requirements. Rough surface, etc., to facilitate the processing of the next process.
4.The cold rolled plate has a good mechanical properties and process properties (such as higher strength, lower yield limit, good deep drawability, etc.).
5.High-speed rolling and full-continuous rolling can be realized with high productivity.
Package of Our Product
Our packaging is additionally strengthened and can withstand the conditions of maritime transport and then resist to more severe stresses. Product quality is always ensured.
Related Products
Q1. How long can make delivery?
A1: For stock products,will make shipments in 2-5 days after receiving deposit or receiving T/T; for products need new production for common materials,usually make shipments in 2-15 days; for products need new special and rare materials,usually need 7-15 days to make shipment.
Q2. Can you provide the samples?
A2:Samples can be provided with samples' charge and courier fee by the buyer's side.
Q3. What's your payment terms?
A3: Down payments 30%TT and balance 70% TT or L/C.
Q4. Can you accept customize?
A4: Yes. It can be customized as per the customers' request.
Q5. How to ensure the quality?
A5:Mill Test Certificate is supplied with shipment.
If needed, a Third Party Inspection is acceptable or SGS.
Product Tags:
|
|
Carbon Stainless Steel Cold Rolled Coil Dc01 Dc02 Dc03 0.2-4mm Thickness Images
|
